Product overview
Sony presents a new machine vision solution package combining a polarised camera with a dedicated processing library & PC-based SDK.
Based on Sony’s newly developed Polarsens IMX250MZR global shutter CMOS sensor, this innovative and compact GigE camera, XCG-CP510, delivers 5.1MP resolution at 23 frames per second.
The combined solution can be used to develop and provide an enhanced level of inspection and detection not normally possible in many different applications such as surface inspection, scratch detection, stress detection, reflection removal/enhancement or 3D reconstruction among others.
Product features
Please be aware that the features/specifications can differ from country to country
XCG-CP510 (camera)
• Sony global shutter Polarsens CMOS sensor
• On-chip polariser
• 5.1 MP @ 23 fps
• GigE Vision 1.2/2.0, PoE
• IEEE1588 compliant
XPL-SDKW (SDK) – Processing Library
• Software license (perpetual)
• Optimised Pre/Post-processing functions
• Support functions for ease of integration
• Independent from acquisition layer
(offline processing support)
Technical Specifications
XCG-CP510
B/W/Colour – B/W
Image Size 5.1 MP
Image Sensor: IMX250 (Polarization image sensor) 2/3-type CMOS Image sensors with a global shutter function (Pregius)
Number of Effective Pixels (H x V): 2 464 ×2 056
Cell Size (H x V): 3.45 μm×3.45 μm
Standard Output Pixels (H x V): 2 448 ×2 048
Frame Rate: 23 fps (8 bit, Mono/Raw)
Minimum Illumination: 1.5 lx (iris: F1.4, Gain: +18 dB, Shutter: 1/23 s)
Sensitivity: F4 (400 lx, Gain:0 dB , Shutter: 1/23 s)
SNR: More than 50 dB (Lens close, Gain: 0 dB, 8 bit)
Gain: Auto,Manual : 0 dB to 18 dB
Shutter Speed: Auto, Manual : 60 to 1/100 000 s
Camera features
Readout Modes: Normal, Partial scan
Readout Features: Test pattern
Synchronization: Hardware trigger, Software trigger, PTP(IEEE1588)
Trigger Modes: OFF (Free run), ON (Edge detection, Trigger width detection), Special trigger (Burst trigger, Bulk trigger, Sequential trigger, Free set sequence)
Userset: 16
User Memory: 64 bytes × 16 ch
Partial Scan
W (Pixel): 16 to 2,464
H (Line): 16 to 2,056
GPO: EXPOSURE/Strobe/Sensor lead out/Trigger through/
Pulse generation: signal/User defined 1, 2, 3 (selectable)
Other Features: Area gain, Defect correction, Shading correction, Temperature readout
Interface
Video Data Output: digital Mono8, 10, 12 bit (default setting 8 bit)
Digital Interface Gigabit Ethernet (1000BASE-T/100BASE-TX)
Camera Specification: GigE Vision® Version 2.0/1.2
Digital I/O: ISO IN (x1), TTL IN/OUT (x2, selectable)
General
Lens Mount: C mount
Flange Back: 17.526 mm
Power Requirements: DC +12 V (10.5 V to 15.0 V), IEEE802.3af (37 V to 57 V)
Power Consumption: DC+12 V 3.3 W (max.), IEEE802.3af 3.7 W (max.)
Operating Temperature: –5 °C to +45 °C (23 °F to 113 °F)
Performance Guarantee
Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature: –30 °C to +60 °C (–22 °F to +140 °F)
Operating Humidity: 20% to 80% (no condensation)
Storage Humidity: 20% to 80% (no condensation)
Vibration Resistance: 10 G (20 Hz to 200 Hz 20 minutes for each direction -x, y, z )
Shock Resistance: 70 G
Dimensions: (W x H x D) 29 × 29 × 42 mm (1 3/16 × 1 3/16 ×1 11/16 inches)
(excluding protrusions)
Mass: Approx. 65 g (2 oz)
MTBF 62,042 hours (Approx. 7.1 years)
Regulations: UL60950-1, FCC Class A, CSA C22.2-No.60950-1, IC Class A Digital Device, CE : EN61326 (Class A), AS EMC: EN61326-1, VCCI Class A, KCC,CISPR22/24+IEC61000-3-2/-3
Supplied Accessories: Lens mount cap (1), Safety Regulations (1)
