Product overview
Small Size. Big Performance.
The XC-ES50/CE and XC-ES30/CE are ultra compact, lightweight one-piece black and white camera modules incorporating the latest 1/2 and 1/3 type Interline (IT) CCDs which produce new levels of picture detail. With miniature dimensions, these units can easily be installed in places where installation was previously difficult for larger cameras. All four models have identical dimensions and controls, making it easy to interchange between modules and also with the XC-EI Series.
A full range of settings is available for differing subject and lighting conditions, with all camera control switches accessible from the outside of the camera. A single standard 12-pin connector provides remote control of input/output signals as well as power.
Excellent shock and vibration characteristics, together with an outstanding MTBF, make these cameras ideal for demanding machine vision and imaging applications.
The recommended camera adapter for these units is the compact and lightweight DC-700/CE.
Product features
Please be aware that the features/specifications can differ from country to country
Latest interline CCDs
XC-ES50/CE and XC-EI50/CE utilise 1/2″ IT CCD, XC-ES30/CE and XC-EI30/CE utilise 1/3″ IT CCD of Sony’s latest interline
technology.
Miniature size
The XC-ES and XC-EI Series come in a very small (29 (W) x 29 (H) x 32 (D) mm) and lightweight package (only 60 g).
High sensitivity and S/N Ratio
The cameras offer very high sensitivity (at F1.4: XC-ES50/CE and XC-ES30/CE: 0.3 lx; XC-EI50/CE: 0.1 lx; XC-EI30/CE: 0.2 lx)
and S/N Ratio ( 60 dB).
Infrared capability
XC-EI50/CE and XC-EI30/CE models offer extended sensitivity in near-infrared (650 to 1000 nm) range
Flexible functions
The XC-ES and XC-EI Series offer many flexible features, such as flexible trigger shutter functions (electronic shutter (1/100
to 1/10,000 s), 2:1 interlace/non-interlace, frame/field exposure, restart/reset function, readout on command, internal/external
(HD/VD, VS) synchronisation, camera settings that can be made at the rear panel and many more.
Standard interfacing
System integration is easy because of the miniature size, C mount, EIAJ standard 12-pin connector, single cable solution for
signal and power, single DC 12V power supply requirement and very low power consumption of only 1.6/1.4 W (1/2 type / 1/3
type)
Rugged construction
The XC-ES and XC-EI Series offer excellent vibration and shock tolerance ( 10G (20 ~ 200 Hz) / 70G ) and a very impressive
125,000 hours MTBF.
Technical Specifications
Technical Specifications
Please be aware that the features/specifications can differ from country to country
Image device | 1/3″ IT CCD |
---|---|
Effective picture elements | 768 (H) x 484 (V) |
Signal system | EIA (Standard) |
Horizontal frequency | 15.734 kHz |
Vertical frequency | 59.94 Hz |
Cell size | 6.35 x 7.4 µm |
Lens mount | C mount |
Flange back | 17.526 mm |
Sync system | Internal / External (auto) |
External Sync system | HD / VD (2 ~ 5 Vp-p) |
External Sync frequency | ±1% |
Jitter | less than ± 50 nsec |
Scanning system | 2:1 Interlaced |
Video output | 1.0 Vp-p, negative, 75 Ω unbalanced |
Horizontal resolution | 570 TV lines |
Minimum illumination* | 0.3 lx |
S/N ratio | 60 dB |
Gain | AGC (0-18 dB) / Manual (0-18 dB) Selectable |
Gamma | ON / OFF |
Normal shutter | 1 / 100 ~ 1 / 10,000 s |
External trigger shutter** | 1 / 4 ~ 1 / 10,000 s |
Power requirements | DC12 V (+9 ~ 16 V) |
Power consumption | 1.4 W |
Dimensions | 29 (W) x 29 (H) x 32 (D) mm (1 3 /16 x 1 3 /16 x 1 5 /16 inches) |
Mass | 70 g |
Operation temperature / Humidity | -10 ~ +50 °C / 20 ~ 80% |
Storage temperature / Humidity | -20 ~ +60 °C / 20 ~ 95% |
Vibration | 10 G (20 ~ 200 Hz) |
Shock resistance | 70 G |
MTBF | 125 000 hours |
Regulations | UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS4252.2 |
(F1.4, AGC ON, without IR cut filter)
Using DIP switch on the rear panel or using trigger pulse width
Supplied Accessories
Lens mount cap (x 1) | |
---|---|
Operation instructions (x 1) |